Supervet Gold
Non-ionic wetting and spreading agent
SUPERVET GOLD can be used on all plants with all types of pesticide mixtures. It can also be used on its own, depending on the intended purpose.
| Use | Rate |
|---|---|
| Fungicides, insecticides, acaricides, plant growth regulators and micronutrients | 10–20 ml per 100 L of water |
| Herbicides | 25 ml per 100 L of water |
| Aerial applications and applications using reduced water volumes | 50 ml per 100 L of water |
Product effectiveness may decrease if the pH of the mixture is above 9 or below 5.
Optimum results are achieved between pH 5 and pH 9. Mixtures prepared within this pH range must be used within 24 hours of mixing.
Mixing recommendations
- Thoroughly clean the spray tank and application equipment.
- Fill the spray tank two-thirds full with water.
- Add the plant protection product or fertiliser according to its label recommendations, in the following order:
- Fertilisers and plant nutrients.
- Dry flowable (DF) and water-dispersible granule (WG) formulations.
- Suspension concentrate (SC) formulations.
- Soluble concentrate (SL) and water-soluble powder (SP) formulations.
- Emulsifiable concentrate (EC) formulations.
- Continue mixing and fill the tank to 90% with water.
- Add SUPERVET GOLD and stir gently for 1–2 minutes.
- Add water until the tank is full.
Mode of action
Reduces the surface tension of liquids, improves surface coverage and adhesion, and promotes pesticide penetration into the plant. It enables surfaces that are difficult to wet to be wetted more easily and completely, ensuring coverage with the pesticide and water mixture.
SUPERVET GOLD is non-ionic.
Packaging
Available in 100 ml packs.